Research Associate, Department of Mechanical Engineering, McGill University
Supervisor: Prof. Pascal Hubert
Ph.D., Mechanical Engineering, École Polytechnique de Montréal, Montreal, Canada
MSc., Mechanical Engineering, École Polytechnique de Montréal, Montreal, Canada
BSc., Aerospace Engineering, Air force Institute, Cordoba, Argentine
Manufacturing and process modeling of composite materials
Advanced numerical simulations of Liquid Composite Moulding processes
Mechanical characterization of polymers and composite materials
Khoun, L., Penet, C., Demaria, C., Trudel-Boucher, D. and Hubert, P., “Effect Of Autoclave Process Parameters On Quality And Performances Of PEEK/Carbon Composite Panels”, 26th ASC/CANCOM conference, Montreal, 2011.
Khoun, L., Trudel-Boucher, D., Wedekind, M., Demaria, C., Baier, H., Hubert, P.,“Design and Manufacturing of a Representative Thermoplastic Composite Primary Aerospace Structure”, SAMPE 2012, Baltimore, MD, May 21-24, 2012.
Phillips, S., Demaria C., Hubert, P. and Lessard, L., “Modelling and experimental characterization of the transverse permeability of flax, hemp and kenaf fabrics,” 11th International Conference on Flow Processing in Composite Materials, Auckland, New Zealand, July 9-12, 2012.
Trudeau, P., Salek, H., Jette, M.A., Hubert, P., Demaria, C., Palardy, G., “Process Induced Deformation of Aircraft Structural Components”, The 19th International Conference on Composite Materials (ICCM-19), Montreal, QC, July 28 – August 2, 2013.
Phillips, S., Lessard, L., Hubert, P., Kuo, P., Sain, M., Demaria, C., “Development of Multi-Scale Biocomposites From Flax, Nanocellulose and Epoxy by Resin Infusion”, The 19th International Conference on Composite Materials (ICCM-19), Montreal, QC, July 28 – August 2, 2013.
Demaria, C., Paździor, P., Johnston, A., Djokic, D., Hubert, P., “Development Of Residual Stresses During Electron Beam Processing”, Journal of Strain Analysis for Engineering Design, April 2014 vol. 49 no. 3 179-189.
Hubert, P., Demaria, C., Keulen, C., Mobuchon, C., Poursartip, A., “Development Of A Workflow For The Design Of Liquid Composite Moulding Processes”, 29th Annual Technical Conference of the American Society for Composites, La Jolla, California, September 8-10, 2014.